Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX6 license problem 1
- Thread starter ameiza
- Start date
- Thread starter
- #2
- Thread starter
- #4
-
1
- #5
PhilJenkins
Industrial
I have just had this problem myself and, taking the vague reference provided by potrero, I decided to nose around the license file for clues.
I found that each line in the license file beginning PACKAGE or INCREMENT contains the expression 24.0. So I changed each occurence to 24.000 and sure enough my license worked correctly.
Thanks to potrero for pointing me in the right direction.
I found that each line in the license file beginning PACKAGE or INCREMENT contains the expression 24.0. So I changed each occurence to 24.000 and sure enough my license worked correctly.
Thanks to potrero for pointing me in the right direction.
Mine has all 24.0 and everything seems to work fine.
I have not used NX6 or i-deas NX6 that much but i have not seen any issues yet.
The only issue i have seen is the with simulation. No results ever get generated. I was assuming i was doing something wrong and since i was only playing around i did not give it much thought.
But i can model, assembly, draft, use the content migration manager. etc.
Anyone think the FEA issues is related?
I have not used NX6 or i-deas NX6 that much but i have not seen any issues yet.
The only issue i have seen is the with simulation. No results ever get generated. I was assuming i was doing something wrong and since i was only playing around i did not give it much thought.
But i can model, assembly, draft, use the content migration manager. etc.
Anyone think the FEA issues is related?
- Status
