Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX4 Motion Simulation "Incorrect Object for this Operation"

Status
Not open for further replies.
cbtracker

cbtracker

Mechanical
Joined
Jul 12, 2007
Messages
4
Location
CA
Hi
I"m new to NX and I'm working on a motion simulation, I had it working fine and I must have done something because now whenever I want to solve using "animation" (I'm using Dynamic/Kinematic and Dynamic Environment) I get an Error message stating "Incorrect Object for this Operation" I had performed a trace by accident and I consequently deleted all the duplicated objects, but two points are still visible and in a "group" I have no clue if this is related but it happened around the same time. Anywho If anyone could help on why this error message comes up or how I can troubleshoot it, it would be greatly appreciated.

Thanks
 
Status
Not open for further replies.

Similar threads

esikoglu
  • Locked
  • Question Question
thePart.CAMSetup.CAMGroupCollection.FindObject("MCS_MILL"); cannot find the object
Replies
0
Views
244
esikoglu
esikoglu
MANox
  • Locked
  • Question Question
Change tabs bar posiotion to "centered"
Replies
2
Views
459
MANox
MANox
Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
719
Asieros
Asieros
Anton Liubimov
  • Locked
  • Question Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
825
Anton Liubimov
Anton Liubimov
DDerek
  • Locked
  • Question Question
How to make "Balloon" Result in only the number for the callout
Replies
3
Views
608
SDETERS
SDETERS

Part and Inventory Search

Sponsor

Back
Top