Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX3 MANUFACTURING QUESTION

Status
Not open for further replies.
EngMfg1

EngMfg1

Aerospace
Joined
Dec 9, 2004
Messages
40
Location
US
HI EVERYONE

I am trying to use a 90deg head on a horizontal machine with the spindle of the angle head face the machine table, I notice that when creating tools in NX3 there are 3 new subtypes for all mill types CARRIER, POCKET, HEAD, does anyone know if the head subtype is used for right angled heads and if so does anyone know how to use it.

If anyone can help with this it would be greatly appreciated

Thanks All
 
Status
Not open for further replies.

Similar threads

bjlasota
  • Locked
  • Question Question
Best 3D printers for Manufacturing Environment
Replies
0
Views
1K
bjlasota
bjlasota
LKENNEDY
  • Locked
  • Question Question
Supplier wants manufacturing process notes on drawing
Replies
7
Views
1K
HR ShoveNstuff
HR ShoveNstuff
Kevin James
  • Locked
  • Question Question
Manufacturing Bent Z profiles
Replies
6
Views
387
berkshire
berkshire
John Donlan
  • Locked
  • Question Question
That's my fellow manufacturing engi
Replies
2
Views
296
John Donlan
John Donlan
enginesrus
  • Locked
  • Question Question
Machine tool question
Replies
8
Views
639
SwinnyGG
SwinnyGG

Part and Inventory Search

Sponsor

Back
Top