Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX1965(1953 series) Assy Nav

Status
Not open for further replies.
Deadbone1

Deadbone1

Aerospace
Joined
Apr 7, 2022
Messages
2
Location
US
I have a component in Assembly Nav that will not display the mass. In the component file it shows the mass but not in the Assy file. Materials are assigned which are also showing in file properties.
Any ideas on what's going on?
 
Sort by date Sort by votes
Are you working in TeamCenter ?

Jerry J.
UGV5-NX1961
 
Upvote 0 Downvote
I am working in TC 11.
The other components in the assy all have mass listed in assy nav.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

E
  • Question Question
Seeing individual elements of an instantiated Feature Template? (Part Navigator)
Replies
1
Views
4K
cowski
cowski
TCS153518
  • Locked
  • Question Question
How to sync the Assy navigator order from Modeling file to its respective drawing file
Replies
7
Views
462
TCS153518
TCS153518
jtozer
  • Locked
  • Question Question
NX1965-Disable Position on Margin when moving dimension after initial placement
Replies
0
Views
173
jtozer
jtozer
mmauldin
  • Locked
  • Question Question
NX 1953 New Sketcher perimeter dimension
Replies
2
Views
475
jerry1423
jerry1423
A
  • Locked
  • Question Question
NX10. Assembly Navigator. Column with freeze status of component
Replies
3
Views
1K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top