Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX11 on Windows - Java prerequisities?
- Thread starter icetea73
- Start date
Arkance/PhoeNX
Mechanical
64 bit version is required for NX.
Anthony Galante
Senior Support Engineer
![](https://res.cloudinary.com/engtips/image/fetch/w_800,c_lfill,q_auto,f_auto,g_faces:center/[URL unfurl="true"]http://i1306.photobucket.com/albums/s580/namdaci/signature_videoCenter_zps09c916dc.jpg[/URL])
NX3 to NX11 with almost every MR (24versions)
Anthony Galante
Senior Support Engineer
NX3 to NX11 with almost every MR (24versions)
- Thread starter
- #3
I experienced some issues with the document server and GTAC recommended a specific version. Sorry, I don't recall what version they recommended but that issue was a while ago so I would try looking it up in the Siemens knowledge base or call GTAC of you cannot locate it. However, when I was experiencing my doc server issues, I was running the latest java version at the time and it ran fine except and I only had issues when I switched computers for the server.
11.0.1
11.0.1
- Status