Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX11 cam - workpiece, specify blank

Status
Not open for further replies.
xuanluc

xuanluc

Mechanical
Joined
Jun 7, 2017
Messages
1
Location
VN
Xin chào
Tôi không hiểu thông số của Bank Distance yêu cầu lớn hơn 1.8330
Xin hỏi thông số đó được tính như thế nào


I use Vietnamese
Please use google translate





FastStoneEditor1_wuvlsd.jpg
 
Sort by date Sort by votes
Why are you using blank distance? This looks like it is milled from a block, so you should use geometry or an auto block.
Are you specifying it in the operation or the geometry parent?

Mark Rief
NX CAM Customer Success
Siemens PLM Software
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

3dr
  • Locked
  • Question Question
NX11 issue in Win 11 after updates
Replies
1
Views
2K
3dr
3dr
3dr
  • Locked
  • Question Question
Drafting Files with mixed units failure, NX11
Replies
3
Views
1K
Toost
Toost
kanoa9321
  • Locked
  • Question Question
NX CAD CAM Workstation Recommendations
Replies
4
Views
4K
Rob_N
Rob_N
3dr
  • Locked
  • Question Question
Journal to change color of solids & sheets, NX11
Replies
0
Views
230
3dr
3dr
nxexplorer
  • Locked
  • Question Question
NX JOURNAL in NX CAM to get the tool diameter and radius of each operation
Replies
1
Views
644
nxexplorer
nxexplorer

Part and Inventory Search

Sponsor

Back
Top