Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX Window Display for multiple files 4

Status
Not open for further replies.

CAD2015

Automotive
Joined
Jan 21, 2006
Messages
2,079
Location
US
Hi,
Catia V5 has the capability to display simultaneously two or more (Catia) files, using Tile Horizontally/Vertically.
Does NX have this option by any chance? It does help…………!
Thanks
 
Thanks, Cowski.
It'd be nice.........
 
Please open an Enhancement Request.

Thank you...

Using NX 8 and TC9.1
 
I know this tip isn't as good as having multiple windows, but it the best i can offer.
You can open multiple sessions of NX on the same computer. ( If you run under Teamcenter, it's a single session only.)
You can without taking more licenses open as many sessions on the same computer as you like, as long as it's the same user and the same computer. ( The same Display Address)

Regards,
Tomas
 
Are your sure about this?
Should I double check with my IT department?
 
It works, but as said before, not through Teamcenter.

NX 7.5.5.4 with Teamcenter 8 on win7 64
Intel Xeon @3.2GHz
8GB RAM
Nvidia Quadro 2000
 
Great tip, thanks Toost and Walterke!
 
It does work and the reason no additional licenses is because you only have 1 active NX session. You cannot be modeling in one session while simultaneously dimensioning a drawing in the other. You can use it for looking at some feature in one and modeling an identical feature in the other session.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top