Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nx Thermal/flow advanced simulation

Status
Not open for further replies.
juansanchez16

juansanchez16

Mechanical
Joined
Jul 3, 2013
Messages
1
Location
US
hey all
make an assembly when done do advanced sim. then after 3D meshing setting the boundaries 2d joints and heat loads it shows the next error when running the solution
WARNING

There is a model update pending.
Perform a model update or the results will not reflect
the changes made to the part.

thanks
 
Status
Not open for further replies.

Similar threads

H
  • Question Question
NX Flow: Results generator error for Tecplot results
Replies
0
Views
2K
Herwig
H
G
  • Question Question
NX Journal
Replies
15
Views
28K
Toost
Toost
CAD2015
  • Question Question
NX X.....................
Replies
9
Views
2K
DrPriest
DrPriest
jmarkus
  • Question Question
NX Journal - Sketch Selection Subroutine
Replies
3
Views
5K
jmarkus
jmarkus
CAD2015
  • Solved
NX assembly exploded view vs NX arrangements.....
Replies
4
Views
3K
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top