Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX Nastran forces through a section for dynamic analysis

Status
Not open for further replies.
mythe40

mythe40

Aerospace
Joined
Apr 10, 2021
Messages
1
Location
US
thread825-467136

See the other thread for some background. MSC Nastran supports using MONPNT3 for dynamic analysis (SOL111) but NX Nastran currently only supports SOL101 and SOL103. What are other ways that the same approach can be achieved using NX Nastran for SOL111?
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
Patran/Nastran Buckling Analysis – SYSTEM FATAL MESSAGE 7340 (LNNHERR)
Replies
1
Views
6K
ThomasH
ThomasH
N
  • Question Question
Nonlinear Buckling Analysis after Pretensioning (Wrinkling Study – Patran/Nastran SOL 400)
Replies
0
Views
5K
Nic0
N
S
  • Question Question
Changing Nastran .f06 file Format
Replies
2
Views
2K
rb1957
rb1957
sivasooriyan
Reg. property groups in Autodesk Nastran
Replies
1
Views
8K
IRstuff
IRstuff
sivasooriyan
  • Question Question
Reg. property groups in Autodesk Nastran
Replies
0
Views
8K
sivasooriyan
sivasooriyan

Part and Inventory Search

Sponsor

Back
Top