Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX Model Unit report using TC 8

Status
Not open for further replies.
RandomDrafter2

RandomDrafter2

Mechanical
Joined
Oct 25, 2006
Messages
1
Location
IN
Is it possible to get a report of how many NX models are in Millimeters and how many in Inches? Is there any attribute created in TC 8 when NX model is saved? Or any other workaround where we can get the unit details in TC 8?
 
Sort by date Sort by votes
Do the information loaded parts report
not satisfied your need.?
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
Part Family Siemens NX & TC synchro issue
Replies
1
Views
1K
Piotrek947
P
G
  • Question Question
NX Journal
Replies
15
Views
28K
Toost
Toost
Befuddled
  • Locked
  • Question Question
Edit UGMaster name from NX using vb.net
Replies
2
Views
1K
Befuddled
Befuddled
CAD2015
  • Question Question
NX X.....................
Replies
9
Views
2K
DrPriest
DrPriest
gurucallie
  • Locked
  • Question Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file
Replies
3
Views
3K
cowski
cowski

Part and Inventory Search

Sponsor

Back
Top