Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX CAM 8.0

Status
Not open for further replies.
deerkill

deerkill

Aerospace
Joined
Jan 28, 2010
Messages
5
Location
US
Trying to create mulitple passes on a profile (in opposite directions with stock allowance on the multiple passes) while only single pass on other features on the profile. Has anyone done this?
 
Status
Not open for further replies.

Similar threads

kanoa9321
  • Locked
  • Question Question
NX CAD CAM Workstation Recommendations
Replies
4
Views
4K
Rob_N
Rob_N
G
  • Question Question
NX Journal
Replies
15
Views
28K
Toost
Toost
CAD2015
  • Question Question
NX X.....................
Replies
9
Views
2K
DrPriest
DrPriest
jmarkus
  • Question Question
NX Journal - Sketch Selection Subroutine
Replies
0
Views
63
jmarkus
jmarkus
CAD2015
  • Solved
NX assembly exploded view vs NX arrangements.....
Replies
4
Views
3K
Toost
Toost

Part and Inventory Search

Sponsor

Back
Top