Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX 8.0 Moding design, Simulation, Kinematic. How to bring the current model in this window, see atta

Status
Not open for further replies.
Bogdan1985

Bogdan1985

Mechanical
Jan 8, 2014
72
Hi Experts,

I have a Molding design for a kind of cylinder and everything is nice, but I cannot get the reference model in the Kinematic Model Window of the "Tooling Motion Simulation Model".

Attached is an image. It's ever a big help in my work to searching here. But this time I cannot find the issue.

Thanks
Bogdan
 
 http://files.engineering.com/getfile.aspx?folder=dab95ad0-002a-4ac6-bf63-a687424a626f&file=NO-KINEMATIC-MODEL-IN-WINDOW.jpg
Replies continue below

Recommended for you

Sort by date Sort by votes
Hi Bogdan,
I am using NX 10 and have the same problem. Did you figure out how to get the "kinematic model"?
Thanks
SS
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

gurucallie
  • Question
Embed an EXcel file into NX 2027 so the file drives a model and stays with the model file 1
Replies
3
Views
3K
cowski
cowski
CAD2015
  • Question
NX 2212 - How to hide centerlines in 2D views..... 1
Replies
2
Views
1K
CAD2015
CAD2015
W
  • Locked
  • Question
how to get graphics window coordinate?
Replies
0
Views
1K
wang.wei
W
W
  • Question
Determine Current Model View Angles
Replies
3
Views
2K
Toost
Toost
mmauldin
  • Locked
  • Question
Can this be done in NX? And if so, how?
Replies
1
Views
374
AZPete
AZPete

Part and Inventory Search

Sponsor

Back
Top Bottom