Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NX 12.0.2.9 drafting application display issues

Status
Not open for further replies.

s_hightower

Mechanical
Joined
Jul 27, 2017
Messages
21
Location
US
Hello, I'm working in a drawing and it looks OK onscreen, but there's some type of glitch that's showing in the PDF. Some of the views are shown as shaded in the NX drawing, but they aren't in the PDF. There's also some objects that show up in the PDF, but they aren't showing in the NX drawing. I even changed the background to white and they still don't show in the drawing. Unidentified flying objects shown in yellow. Any idea why? Thanks

more_junked_out_NX_display_wptym0.png
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top