Is there a way to temporarily disable the decals applied to a model in Ray Traced Studio? I don't want to delete the decals from the model/assembly because they have been carefully positioned. Is there a rendering setting that controls the display of the decals maybe?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NX 10 Ray Traced Studio - disable decals
- Thread starter Ritchie
- Start date
JohnRBaker
Mechanical
I suspect not, particularly if you still want to see the rest of the model fully rendered. Of course, you could simply extract faces from your model and place the decals on them instead of the actual faces of the model then you could simply hide/suppress these extracted faces which will take the decals with them.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:
To an Engineer, the glass is twice as big as it needs to be.
- Thread starter
- #3
John, Do Decals use external image files when they have been created, i.e if I move the part to a location where my load options doesn't find the image, will the Decal still render ?
I remember that somewhere back in time , materials with mapped images had this characteristic.
Regards,
Tomas
I remember that somewhere back in time , materials with mapped images had this characteristic.
Regards,
Tomas
- Status