Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nozzle strength
- Thread starter craghav
- Start date
LittleInch
Petroleum
Sorry craghav, but nowhere near enough information here to give you an answer. As much info as possible, but min is size, type of connection, wall thickness, material strength, fluid, what the nozzle is connected to, design code of your system, etc etc. "1/2 sch" doesn't mean anything to me.
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
My motto: Learn something new every day
Also: There's usually a good reason why everyone does it that way
- Thread starter
- #3
For a novice a good place to start is here:
Here is a US Vendor:
prognosis: Lead or Lag
Here is a US Vendor:
prognosis: Lead or Lag
- Status
Similar threads
- Locked
- Question
- Question