Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nozzle attached to Dimple Jacket

Status
Not open for further replies.
gurtej

gurtej

Mechanical
Aug 25, 2008
8
I have a vessel in which a 5/64 thick dimple jacket is on top of a 3/16th thick vessel. I did calculations for dimple jacket as per UW-19(c)(2). There are also 3 nozzles attached to this jacket as UW 16.1(m).
How do I do calculations for these nozzles?
 
Status
Not open for further replies.

Similar threads

IdanPV
  • Question
Nozzle to Shell Weld
Replies
11
Views
4K
DekDee
DekDee
dbday
  • Locked
  • Question
Nozzle bore machining 1
Replies
5
Views
2K
r6155
r6155
RadiateurFou
  • Question
Buckling analysis of header/nozzle assembly
Replies
2
Views
2K
RadiateurFou
RadiateurFou
Awais371
  • Locked
  • Question
Codeware COMPRESSS Nozzle FEA Error
Replies
4
Views
2K
Awais371
Awais371
B
  • Locked
  • Question
How are loads from attached external piping considered in ASME VIII-2?
Replies
8
Views
3K
Barus
B

Part and Inventory Search

Sponsor

Back
Top Bottom