Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NORSOK Certification 2

Status
Not open for further replies.

MG79

Petroleum
Joined
Apr 28, 2011
Messages
8
Location
KR
We have a foundry looking to be "NORSOK Certified".
The question is How shall be proceed to get this ? Is there a special process to be followed?

Please, reply to mingi.kwon79@gmail.com



Thanks

MG
 
I dont thnik that possible. But try contacting "Norsk standard" - you should find link on the NORSOK web page.

Best regards

Morten
 
MG79,

My impression is that the Norsok stds. are only for eqpt put into the North Sea; I may be way off. I do know that it is incredibly stringent and very expensive. I've heard it is levels above ISO 9001 certification.

Are you supplying castings for eqpt. to be installed in the North Sea area??
 
Thanks Gent.

Best regards
MG
 
Woa - i was just as clever back then (may that be positive or negative :-) )!

Best regards Morten
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top