Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

nonlinear static analysis "pushover" using etabs 2016

Status
Not open for further replies.
deezed

deezed

Structural
Joined
Nov 24, 2013
Messages
2
Location
DZ
hello,
i have g+3 rc building model using etabs 2016,when i run the nonlinear static analysis the run shows that the operation is not finished as shown in the picture,what could be the reason please!
2172594f-dba2-4bc4-b188-b2b05ae54689-large_ulxssb.jpg
 
Status
Not open for further replies.

Similar threads

hamedall
  • Locked
  • Question Question
ETABS API-2016
Replies
2
Views
1K
hamedall
hamedall
X4vier
  • Locked
  • Question Question
"do you want to reiterate analysis and design" Option not available on ETABS 22
Replies
4
Views
1K
Luceid
Luceid
eminsade
  • Locked
  • Question Question
ETABS API Python "Analysis Result"
Replies
0
Views
540
eminsade
eminsade
GJoeRMK
  • Locked
  • Question Question
Does anyone know why etabs asign masses to "Base" (I assume is the nodes in the foundation
Replies
2
Views
892
GJoeRMK
GJoeRMK
O
  • Question Question
Cold Form Shear Walls in ETABS
Replies
0
Views
5K
olipax
O

Part and Inventory Search

Sponsor

Back
Top