Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Non-layered, Z1 and Z2

Status
Not open for further replies.
Cdz

Cdz

Marine/Ocean
Joined
Feb 7, 2007
Messages
5
Location
ES
Hi!
I'm trying to obtain non-layered results for cquads elements (non-linear strains, strain tensor)using .f06, in that file I can see the results for Z1 and Z2, exactly as they appear in Patran, but the cuestion is: how can I obtain the results for non-layered option, or at least what calculation Patran is doing to obtain them?
thanks.
 
Status
Not open for further replies.

Similar threads

P
  • Locked
  • Question Question
SOL401 and negative matrix diagonal
Replies
1
Views
1K
BlasMolero
BlasMolero
jmarkus
  • Locked
  • Question Question
Nastran SOL 106 - Bi-/Tri-Linear Stress Strain result from Non-linear Material curve
Replies
8
Views
2K
tim1958
tim1958
N
  • Question Question
Nonlinear Buckling Analysis after Pretensioning (Wrinkling Study – Patran/Nastran SOL 400)
Replies
0
Views
5K
Nic0
N
Spyros07
  • Locked
  • Question Question
Modal stiffness and mass matrices extraction
Replies
3
Views
2K
jamesdean2
jamesdean2
Alberto94
  • Locked
  • Question Question
Non-linear torque vs angle relationship using CBUSH
Replies
1
Views
443
Alberto94
Alberto94

Part and Inventory Search

Sponsor

Back
Top