PAN
Mechanical
- Apr 25, 2001
- 549
In ANSYS/FLOTRAN, the nominal viscosity shall be specified in this formulation.
viscosity = VO * K * D **(n-1)
where
K = consistency index
D = shear rate or cutoff shear rate
n = power
VO = nominal viscosity
In my understanding the nominal viscosity should be 1.0 or less. Anyone who use ANSYS/FLOTRAN, please advise me about the meaning of nominal viscosity.
viscosity = VO * K * D **(n-1)
where
K = consistency index
D = shear rate or cutoff shear rate
n = power
VO = nominal viscosity
In my understanding the nominal viscosity should be 1.0 or less. Anyone who use ANSYS/FLOTRAN, please advise me about the meaning of nominal viscosity.
