Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

nominal diameter

Status
Not open for further replies.

lahcen

Mechanical
Joined
Oct 23, 2013
Messages
34
Location
DZ
Hi guys;
I want to know the relation between the real diameter and the nominal diameter of centrifugal compressor; for example for BCL307 (the real diameter of impeller is 370mm but the nominal diameter is 300mm).
Thanks.
 
Is it mentionned nominal diameter of impeller?
 
Hi rotw;
for BCL 307 (after the Operating manual of the machine, 30 it is the nominal diameter =300mm,but the real diameter of impeller is 370mm)
Thanks.
 
They have standardized frame sizes for the casing. In this particular case, 300 size can accomodate a range of impeller diameters [D2min,D2max]. Note that this range may vary by impeller type (2D or 3D) and/or family.
An impeller of 370mm should be inside this range and fits inside the selected casing size.

Actually this is more of a tagging issue. It matters if you ask a reference list for example, you would want to compare BCL 30x.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top