Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Noise level measurement in industrial equipment standards

Status
Not open for further replies.
winflex

winflex

Mechanical
Joined
Jul 1, 2009
Messages
12
Location
US
We are trying to measure the noise emitted by our products (pumps and pressure exchangers). I found some ISO and ASTM standards that describe how this is done but don't know which one is the right one to use.
I am currently looking at ASTM E2202, E1014 and ISO 3704, 2204.
Please advise on which standards are the most appropriate to use here.

Thank you!
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question Question
Detecting and Analyzing Noise in an Actuator
Replies
1
Views
2K
GregLocock
GregLocock
kingnero
  • Locked
  • Question Question
Welding on top of rail, to avoid noise in curves
Replies
4
Views
5K
kingnero
kingnero
revvedmoto
  • Locked
  • Question Question
Dyno - Noise Complaints
Replies
6
Views
868
FacEngrPE
FacEngrPE
hirschaplin
  • Locked
  • Question Question
Approach to predict the noise level of a rotary machine
Replies
1
Views
415
GregLocock
GregLocock
hirschaplin
  • Locked
  • Question Question
Approach to predict noise level and how to communicate it
Replies
3
Views
772
geesaman.d
geesaman.d

Part and Inventory Search

Sponsor

Back
Top