Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

node numeration

Status
Not open for further replies.
albert1981

albert1981

New member
Joined
Feb 16, 2007
Messages
61
Location
GB
Dear all,

I would like to know if there is a way in ABAQUS to re-numerate the nodes. For example re-numerate the nodes alogn one line.

Thanks,
Albert
 
Status
Not open for further replies.

Similar threads

F
  • Question Question
ABAQUS error - 'Node set assembly_left_rp' has not been defined
Replies
1
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
D
  • Locked
  • Question Question
How to model a 2-node beam element
Replies
1
Views
1K
FEA way
FEA way
K
  • Locked
  • Question Question
How to Directly Output Strain Values for Specific Node/Element Sets Without Writing an ODB File in Abaqus?
Replies
3
Views
2K
FEA way
FEA way
heaven14
  • Locked
  • Question Question
Node Stiffness
Replies
1
Views
218
FEA way
FEA way
S
  • Locked
  • Question Question
Need Help Extracting SPH U1 Nodes with Python
Replies
1
Views
2K
FEA way
FEA way

Part and Inventory Search

Sponsor

Back
Top