NO PARAM values set in control file.

[markborges]

Hi all, I have inheritied a linear static patran 2004 database with lots of pins, beams, shells and solids and I am trying to run in Nastran 2004. The analyis fails with the "NO PARAM values were set in control file." Any idea what this might be from. Thanks Mark

 

[kellnerp]

Read the docs for the PARAM card and manually enter appropriate values for it.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

"Node news is good news."

 

[gwolf2]

And/or work through some of the analysis control forms under the analysis menu before exporting the NASTRAN input file.

 

[markborges]

Thank you, I deleted a few bad elements and it ran fine.