Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nitronic 50 in boiler feed water

Status
Not open for further replies.
kevlar49

kevlar49

Materials
Joined
Jun 1, 2006
Messages
287
Location
US
Does anyone know of any problems with using Nitronic 50 stems in boiler feed water valves operating around 200°F?
 
Sort by date Sort by votes
I don't see any problem with using N50 at your conditions. I would use the 1950F annealed material.

I've used N50 and N60 all around boiler feed water pumps and valves.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

GetAtMeWolf
  • Locked
  • Question Question
Corrosion in High-Temp Hot Water Boiler System, specifically makeup water piping
Replies
6
Views
667
EdStainless
EdStainless
B
  • Question Question
Corrosion(?) on stainless at a waste water plant
Replies
9
Views
14K
Dhurjati Sen
Dhurjati Sen
ShabsRBI
  • Locked
  • Question Question
Pump body for Sour Water Service
Replies
7
Views
2K
LittleInch
LittleInch
rscosta1976
  • Locked
  • Question Question
ASTM method for hydrotreater feed chloride measurement
Replies
0
Views
274
rscosta1976
rscosta1976
Ondas
  • Locked
  • Question Question
Likely damage mechanism on a boiler
Replies
10
Views
533
mrfailure
mrfailure

Part and Inventory Search

Sponsor

Back
Top