Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NITINOL COILED SPRINGS

Status
Not open for further replies.
koza19

koza19

Mechanical
Joined
Sep 28, 2005
Messages
52
Location
US
Material: 0.014" Nitinol # 1 condition cold worked spring temper surface finish: etched and polished.
type of spring compression spring closed ends not ground

Looking for any online resources for manufacturing guidelines.


Thanks


 
Status
Not open for further replies.

Similar threads

Meche1234
  • Locked
  • Question Question
FEA resources for springs/elastic deformation
Replies
0
Views
756
Meche1234
Meche1234
subsearobot
  • Locked
  • Question Question
rusty 17-7 springs?
Replies
2
Views
897
subsearobot
subsearobot
feajob
  • Locked
  • Question Question
Margins of Safety Calculation for Compression Springs
Replies
6
Views
2K
feajob
feajob
rfdesign1
  • Locked
  • Question Question
Impossibly tangled springs. How should spring be redesigned?
Replies
4
Views
701
rfdesign1
rfdesign1
Ivan Santos
  • Locked
  • Question Question
Applying Epoxy prime on torsional springs with close wound.
Replies
1
Views
215
tbuelna
tbuelna

Part and Inventory Search

Sponsor

Back
Top