Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NFPA STANDARD 16.1.9.2
- Thread starter Rackings
- Start date
skdesigner
Mechanical
NFPA 13 2010 16.1.9.2 is giving the field guys an acceptable tolerance. They don't need to notch the sheet of plywood or sheet metal to the exact dimensions of the vertical supports (rack uprights). They just need to be within two inches on any side.
- Status
Similar threads
- Locked
- Question
