Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NFPA 14 and grooved joints

Status
Not open for further replies.

sprinkler1000

Mechanical
Joined
Sep 18, 2010
Messages
117
Location
UY
We could not find any reference to grooved joints in piping in NFPA 14.

¿Are they allowed as a piping joining method in non sprinkler protected spaces?
 
NFPA 14-2013 4.4.3 Groove Joining Methods

4.4.3.1 Pipes joined by grooved fittings shall be joined by a listed combination of fittings, gaskets and grooves.

Good to go.

R M Arsenault Engineering Inc.
 
skdesigner:

Thanks for the information.

NFPA 14 requires protection of piping in enclosing with same fire rating as stairway enclosure.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top