New and need idea's

[Phudgey]

ok well hello, i have recently got solid edge but recently ran into a problem, the reason why i got solid edge was to get better with cad so i could get a job but recently iv been lost for ideas of what to model so i wondered if any of you guys/gals could list some of you earlier projects and what would be even more helpful is if you would a little brief of how you made it

Thanks,
Fudge

(oh one more thing, how is solid edge for modeling organic things i.e human hands/heads ect not important, just i always wondered)

 

[beachcomber]

Hi Fudge,
Welcome to the forum.
If you are new to Solid Edge, first thing to do is work through the tutorials.
You will find them under Help > Tutorials.
These will give you a good start, and it's something a lot of people miss.
As for a 'project' - just pick up an everyday object, measure it and try to model it, a telephone for example.

For tutorials and tips on surfacing and most other things have a look atTushar Suradkar's site at htttp://

http://www.geocities.com/segurucool

bc.

bc.