Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Neoprene compression behaviour

Status
Not open for further replies.
JFre

JFre

Mechanical
Joined
Nov 13, 2013
Messages
5
Location
GB
Hi

I am trying to track down some compression stress-strain tables for Neoprene rubber (Polychloroprene), IRHD 60. I have a problem which is very sensitive to the amount of compression that the neoprene can withstand in a region with a free edge (it is free to bulge).

Any suggestions?

Thanks
 
Status
Not open for further replies.

Similar threads

R
  • Question Question
Reduce compression set of chloroprene/neoprene
Replies
5
Views
6K
WKTaylor
WKTaylor
Crystal P
  • Locked
  • Helpful tip Helpful tip
Compression Set Tested by Compression Set Fixture
Replies
1
Views
273
GrahamBennett
GrahamBennett
nadherrr
  • Locked
  • Question Question
HNBR sh70 compression
Replies
0
Views
193
nadherrr
nadherrr
blckwtr
  • Locked
  • Question Question
Over compression
Replies
1
Views
240
Ahmad Uzair
Ahmad Uzair
Pete51
  • Locked
  • Question Question
Cure systems for Low Compression Set in NR
Replies
3
Views
446
GrahamBennett
GrahamBennett

Part and Inventory Search

Sponsor

Back
Top