Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Neoprene Bearings pads Design 3
- Thread starter EngRabih
- Start date
-
1
- #2
bridgebuster
Active member
-
1
- #4
SlideRuleEra
Structural
For older information, see "Engineering Properties of Neoprene Bridge Bearings - 1984", on this page of my website
![[idea]](/data/assets/smilies/idea.gif "[idea] [idea]")
- Thread starter
- #5
-
1
- #7
If you state doesn’t have much guidance on detailing the bearings, AASHTO/NSBA have a nice publication on the topic:
It includes details for elastomeric bearings, as well as high load multi-rotational bearings, and steel bearings. This is a good document to have in your reference library.
It includes details for elastomeric bearings, as well as high load multi-rotational bearings, and steel bearings. This is a good document to have in your reference library.
- Status
Similar threads
