Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEMA SM23 for Turbine Nozzle Forces and Moments

Status
Not open for further replies.
SENGUTTUVAN

SENGUTTUVAN

Mechanical
Joined
Jan 30, 2002
Messages
82
Location
IN
A basic clarification is sought. Normally for the pumps there is API standard which clearly specifies the Allowable Nozzle forces and moments in various directions. But for the Turbines eventhough there are API standards, why NEMA SM23 is being referred? Why this is not specified in API?
 
Status
Not open for further replies.

Similar threads

Finnn
  • Locked
  • Question Question
Stabilising and Destabilising moments
Replies
4
Views
347
Tmoose
Tmoose
S
API 653 - Calculate Nozzle Tmin
Replies
1
Views
4K
Louisiana Inspector
Louisiana Inspector
Rreach
  • Locked
  • Question Question
Steam Turbine Shutdown Procedure
Replies
2
Views
2K
georgeverghese
georgeverghese
Helepolis
  • Question Question
Standard for keys and keyways/keyseats design (Aircraft)
Replies
8
Views
8K
EdStainless
EdStainless
ismail06
  • Locked
  • Question Question
string test of rotating machine like gas compressor and gas turbine generator
Replies
3
Views
873
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top