Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Needed Help in Brass Swing Check Valve Design

Status
Not open for further replies.
AUTERIC

AUTERIC

Industrial
Joined
Dec 29, 2009
Messages
2
Location
MY
Dear all,

I had a customer request design a brass swing check valves that can fit in safety wire. Do anyone have design it or seen it before ? Anyone can help me will be appreciated.

Guys i need so suggestion so i can design it.

Thanks!

Regards,
Eric
 
Sort by date Sort by votes
Do you mean a valve where the threaded components can be safety wired?
 
Upvote 0 Downvote
Yes...but i had figure it out now. Just drilled holes on the component will do.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

I
  • Question Question
Classification of Swing Check Valve Opening Type per API 6D Clause 4.4
Replies
5
Views
16K
ilkerdburhan
I
trentar
  • Question Question
example of 12516 valve design calculations
Replies
0
Views
8K
trentar
trentar
trentar
  • Question Question
numerical example of valve design calculations acc to iso en 15761
Replies
0
Views
6K
trentar
trentar
T
  • Locked
  • Question Question
Flowrate in a valve
Replies
4
Views
3K
Snickster
Snickster
A
  • Question Question
Use of Gate Valve for Throttling
Replies
13
Views
12K
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top