Nov 2, 2007 #1 suelflow Civil/Environmental Apr 6, 2007 66 I need to model an open chock for marine use and have no idea how to go about it. See attached picture.
I need to model an open chock for marine use and have no idea how to go about it. See attached picture.
Nov 8, 2007 Thread starter #21 suelflow Civil/Environmental Apr 6, 2007 66 Given that I did not have to be completely accurate (we are working on line handling layout) I whipped out this in a couple minutes. I will work on a realistic one with sweeps, etc. in my spare time. Thanks all for the input. http://files.engineering.com/getfil...9e47-4b30-a783-639903540d0f&file=Chock_36.jpg Upvote 0 Downvote
Given that I did not have to be completely accurate (we are working on line handling layout) I whipped out this in a couple minutes. I will work on a realistic one with sweeps, etc. in my spare time. Thanks all for the input. http://files.engineering.com/getfil...9e47-4b30-a783-639903540d0f&file=Chock_36.jpg
Nov 8, 2007 #22 ctopher Mechanical Jan 9, 2003 17,509 Chock one up for suelflow. Looks good! Chris SolidWorks 07 4.0/PDMWorks 07 AutoCAD 06 ctopher's home (updated 10-07-07) ctopher's blog Upvote 0 Downvote
Chock one up for suelflow. Looks good! Chris SolidWorks 07 4.0/PDMWorks 07 AutoCAD 06 ctopher's home (updated 10-07-07) ctopher's blog
![[thumbsup2]](/data/assets/smilies/thumbsup2.gif "[thumbsup2] [thumbsup2]")
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")