Jan 24, 2013 #1 BCA2004 Chemical Joined Oct 11, 2011 Messages 3 Location US Has anybody defined Shell Heat Transfer Oil S2 as a component for simulation?
Jan 28, 2013 #2 mbt22 Chemical Joined Mar 9, 2006 Messages 180 Location GB Googling for "Shell Heat Transfer Oil S2" gives all the physical property data that I can think of needing as the first response. Matt Upvote 0 Downvote
Googling for "Shell Heat Transfer Oil S2" gives all the physical property data that I can think of needing as the first response. Matt
Jan 28, 2013 Thread starter #3 BCA2004 Chemical Joined Oct 11, 2011 Messages 3 Location US I have got the technical data sheet for the oil,but it only has IBP of the fluid. Upvote 0 Downvote
Jan 29, 2013 #4 mbt22 Chemical Joined Mar 9, 2006 Messages 180 Location GB What are you trying to do? The maximum film temperature is listed at 340 deg C, versus an IBP of 355 deg C. You shouldn't need a boiling curve for design, I would have thought. Matt Upvote 0 Downvote
What are you trying to do? The maximum film temperature is listed at 340 deg C, versus an IBP of 355 deg C. You shouldn't need a boiling curve for design, I would have thought. Matt