Need help in understanding output

[___obviously]

I'm having problem in reading the output. I've created a piled raft foundation. I've applied load on top of raft. The load is getting transferred to soil and piles by raft. I want to find out how much of my total load is acting on soil. For this which option should I select? If I select CFT3, addition of CFT3 (Contact Force Total) for piles and soil is not equal to applied load. If I select S33 for pile bottom and pile shaft and raft bottom and calculate force by multiplying with area and add it, I'm not getting it equal to applied load.
If I select reaction forces, I'm getting reactions at support. How can I find out how much % of load is acting on soil? (Which option should I select?)
Can someone please help me

 

[FEA way]

You can use contact pressure (CPRESS) output variable for that.

 

[___obviously]

Thankyou for your reply! I am not getting it with CPRESS as output variable. The summation of loads is not equal to load calculated with CPRESS

 

[FEA way]

It won’t be equal since CPRESS has pressure unit but you can derive forces from it (there are also separate variables for contact force output).