Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need help in report generation for strains in PATRAN

Status
Not open for further replies.
Aviatorbarath

Aviatorbarath

New member
Dec 27, 2012
35
Hi

How to write a report for strains for the selected elements in a range in PATRAN..any suggestios will be helpful

Regards
Barath
 
Replies continue below

Recommended for you

Sort by date Sort by votes
do you mean ...
1) how to write a report, or
2) how to get PATRAN to report strains ?

Quando Omni Flunkus Moritati
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question
Rutman Fastener Modelling in Patran
Replies
2
Views
2K
Alex Szatmary
Alex Szatmary
A
  • Locked
  • Question
Help with Adaptive Quadrature in Finite Cell Method
Replies
3
Views
2K
rb1957
rb1957
F
  • Locked
  • Question
Modelling clearance holes MSC Nastran/patran sol 400
Replies
2
Views
2K
SWComposites
SWComposites
D
Meshing in Femap
Replies
3
Views
2K
rb1957
rb1957
bugbus
  • Locked
  • Question
A few questions on stress concentrations, yielding, strains, etc. 1
Replies
6
Views
650
bugbus
bugbus

Part and Inventory Search

Sponsor

Back
Top Bottom