Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need help in report generation for strains in PATRAN

Status
Not open for further replies.
Aviatorbarath

Aviatorbarath

New member
Joined
Dec 27, 2012
Messages
35
Location
US
Hi

How to write a report for strains for the selected elements in a range in PATRAN..any suggestios will be helpful

Regards
Barath
 
Sort by date Sort by votes
do you mean ...
1) how to write a report, or
2) how to get PATRAN to report strains ?

Quando Omni Flunkus Moritati
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Y
  • Locked
  • Question Question
Rutman Fastener Modelling in Patran
Replies
2
Views
3K
Alex Szatmary
Alex Szatmary
YuJie_PV
  • Question Question
1/2 loading for 1/2 model in ansys?
Replies
9
Views
10K
YuJie_PV
YuJie_PV
A
  • Locked
  • Question Question
Help with Adaptive Quadrature in Finite Cell Method
Replies
3
Views
2K
rb1957
rb1957
F
  • Locked
  • Question Question
Modelling clearance holes MSC Nastran/patran sol 400
Replies
2
Views
2K
SWComposites
SWComposites
AhmedEltaweel
  • Question Question
stresses in girder using CSI bridge
Replies
0
Views
5K
AhmedEltaweel
AhmedEltaweel

Part and Inventory Search

Sponsor

Back
Top