Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Need Help for PROJECT in DIGITAL SIGNAL PROCESSING
- Thread starter sumit
- Start date
I assume that you are modelling some signals based on a set of parameters and variables. If so then you will most likely develop a (some) linear predictive model(s). These will be of the form G(z) = BX where:
z is a set of parameters, which are functions of the variables X; (x1, x2,....,xn) and B is a set of coefficients, which you could call linear predictor coefficients.
For the mathematical side of it might I recommend that you refer to "An Introduction to Generalized Linear Models" by Annette Dobson (Chapman and Hall, 1990)
Harry Battam
Harry.Battam@team.telstra.com
z is a set of parameters, which are functions of the variables X; (x1, x2,....,xn) and B is a set of coefficients, which you could call linear predictor coefficients.
For the mathematical side of it might I recommend that you refer to "An Introduction to Generalized Linear Models" by Annette Dobson (Chapman and Hall, 1990)
Harry Battam
Harry.Battam@team.telstra.com
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
