Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Neat gears from an HP printer

Status
Not open for further replies.
amcalpine

amcalpine

Mechanical
Joined
Oct 13, 2008
Messages
2
This is neat, it is an explanation of the reversing mechanism of an HP printer duplexer. There must be very smart engineers over at HP, well at least ten years ago.. It's an old machine.
Lots of gears.
Sorry I posted this in the wrong place at first
 
Sort by date Sort by votes
Clever application of one-way clutches.

Ted
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

A
  • Question Question
Planetary Gears - Independent Rotation
Replies
4
Views
14K
BrianPetersen
BrianPetersen
M
  • Question Question
Is there any reason a forged replacement gear would cause problems to surrounded cast gears?
Replies
9
Views
3K
dgeesaman
dgeesaman
T
  • Locked
  • Question Question
Can gears mesh with different operating pressure angle?
Replies
7
Views
4K
mfgenggear
mfgenggear
mattyjb88
  • Locked
  • Question Question
Assessment of split-pitch (Fellows?) gears
Replies
0
Views
331
mattyjb88
mattyjb88
SMKRe
  • Locked
  • Question Question
Maximum temperature of ISO VG32,46&68 oils for sufficient film thickness between meshing gears?
Replies
1
Views
621
geesaman.d
geesaman.d

Part and Inventory Search

Sponsor

Back
Top