Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NDT Report Sample

Status
Not open for further replies.

IFRs

Petroleum
Nov 22, 2002
4,673
What would a steel weld dye penetrant test report look like? Any samples or examples out there?
 
Replies continue below

Recommended for you

IFRs;
Simple answer, contact a local nondestructive testing (NDT) company and have them send you a copy of a typical Liquid Penetant test (PT) report that they would provide to a customer. Most reputable NDT contractors would do this for your business. I gather from the nature of your question, that you do not have this in-house capability.
 
If you have access to Sec V, the minimum requirements are given in T-692
 
Send me an e-mail with your e-mail address and I'll send you a copy of my report form.

Al
 
gtaw - forum rules prohibit posting of email addresses, but mine can be found in my profile, towards the end.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor