ddiliberto
New member
Do anybody knows an NDI inspection which permit to discover corrosion in the bore of an hole in which is installed a bushing?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NDI inspection of an attaching lug
- Thread starter ddiliberto
- Start date
- Status
- Thread starter
- #3
ddiliberto
New member
Thank you Berkshire,
I will try your solution too. In the meantime I found the following company, which is proposing a dedicated technology
Regards
I will try your solution too. In the meantime I found the following company, which is proposing a dedicated technology
Regards
- Status
Similar threads
