NC Block output difference

[Bingos]

Hi All

Is there any difference in the blocks

G94 G17 G81 X Y Z F

and

G17 G81 G94 X Y Z F

does both blocks gives same output..?

Thanks

 

[looslib]

Those blocks should produce the same results.


"Wildfires are dangerous, hard to control, and economically catastrophic."

Ben Loosli

 

[joycejo]

It depends on the machine control.
Most controls do not care what order the blocks are in. Some "older" controls are very picky about the order.
In post builder you can change the order from the Word sequencing page. Just drag and drop the blocks in the order you need.

John Joyce
Tata Technologies iKS
1675 Larimer St.
Denver, CO

http://www.myigetit.com