Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NB Random on Random

Status
Not open for further replies.

izax1

Mechanical
Joined
Jul 10, 2001
Messages
293
Location
NO
I think I have this right, but I would appreciate to get this verified.
I have a RoR Vibration Specification from a Tracked vehicle. Several Phases are defined with up to 5 Narrowbands for each Phase.Each NB defines a sweep BW which is half of each BW. Does that mean that the sweep BW is swept inside the BW for each Phase?
An exmaple: One Narrowband is from 18-30 Hz where the sweep BW is defined as 6 Hz. Does that mean that the 6 Hz narrowband could be anywhere within 18-30 Hz?
Thank you for any enlightment.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top