NAVFAC DM-2 1

[DHKpeWI]

Does anyone have a copy of NAVFAC DM-2 document. I need the wind loads from this document to evaluate a building designed in 1964-65.

 

[DHKpeWI]

The document is also called NAVDOCKS DM-2

 

[RFreund]

Not sure what the copyright situation is so I would google: navfac DM-7.2

pretty sure u'll find a pdf.

EIT

 

[PSlem]

Go to

http://www.vulcanhammer.net/geotechnical/dm7_02.pdf

 

[DHKpeWI]

Thanks PSlem.

The document I am looking for was used to determine wind loads and was called NAVDOCKS DM-2 or NAVFAC DM-2. The document you uploaded is for foundations.

 

[RFreund]

I think your looking for a different document the file PSlem uploaded is NAVFAC DM-2

EIT

 

[boo1]

NAVFAC DM 2, Structural Engineering was changed to UFC 1-200-01:

http://www.wbdg.org/ccb/DOD/UFC/ufc_1_200_01.pdf

"The Unified Facilities Criteria (UFC) system is prescribed by MIL-STD-3007 and provides planning, design, construction, sustainment, restoration, and modernization criteria, and applies to the Military Departments, the Defense Agencies, and the DoD Field Activities in accordance with USD(AT&L) Memorandum dated 29 May 2002."

The status NAVFAC ENGINEERING CRITERIA can be checked at:

http://www.wbdg.org/ccb/NAVFAC/DMMHNAV/engineering_criteria.pdf

 

[DHKpeWI]

I realize that NAVFAC DM-2 is no longer used. I am trying to evaluate the loads used for an existing building when NAVFAC DM-2 was used.

 

[j19]

I have parts and pieces of NAVFAC DM-2, October 1970. I've attached the pages that I have from Chapter 1, Loads. Maybe they will help you. Note: some of the pages are missing so be careful.

 

[DHKpeWI]

j19:

Thank you, thank you, thank you!