Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

NASTRAN SOL 106 Question

Status
Not open for further replies.
wildboar

wildboar

Automotive
Jan 23, 2004
13
I always use true stress and true strain values when modelling material non-linearity in FEA.I have been told that when running NASTRAN SOL 106 i should be using engineering stress and strain values.

Can anyone confirm if this is true.Thanks.
 
Status
Not open for further replies.

Similar threads

M
  • Locked
  • Question
Use SRS input for Nastran SOL 111
Replies
3
Views
4K
BlasMolero
BlasMolero
F
  • Locked
  • Question
Modelling clearance holes MSC Nastran/patran sol 400
Replies
2
Views
2K
SWComposites
SWComposites
cachopan
  • Question
Craigth Baptom Superelement op4 Siemens To MSC Nastran
Replies
0
Views
1K
cachopan
cachopan
joesm519
  • Question
Equivalent of "Measures" of Creo Simulate in Autodesk Nastran
Replies
0
Views
665
joesm519
joesm519
N
  • Locked
  • Question
MSC NASTRAN for ABAQUS CAE
Replies
4
Views
3K
dmapguru
dmapguru

Part and Inventory Search

Sponsor

Back
Top Bottom