Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Nastran flow results - Post view

Status
Not open for further replies.
Bart1992

Bart1992

Agricultural
Joined
Apr 7, 2014
Messages
5
Location
NL
I am struggeling creating the flow results view I need; in the attached image left side are results and right side is model with meshed area. Those two images need to be combined so that the results are shown in the actual model. I don't know if this is even possible? Any suggestions?

Siemenx NX8 - Teamcenter 8.5 Windows 7
 
 http://files.engineering.com/getfile.aspx?folder=d84ef20d-7dd6-4e11-b605-223f1f233e04&file=FEM.jpg
Status
Not open for further replies.

Similar threads

H
  • Question Question
NX Flow: Results generator error for Tecplot results
Replies
0
Views
2K
Herwig
H
H
  • Question Question
NXOpen Section view creation
Replies
6
Views
5K
Husky Dusky
H
Kenja824
  • Question Question
Model Items Selectable in Drafting View?
Replies
5
Views
673
Kenja824
Kenja824
CAD2015
  • Locked
  • Question Question
Nastran learning
Replies
0
Views
241
CAD2015
CAD2015
CAD2015
  • Locked
  • Question Question
Detail View in drawing - Modifications
Replies
2
Views
2K
CAD2015
CAD2015

Part and Inventory Search

Sponsor

Back
Top