Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

narrowbandpass filter

Status
Not open for further replies.

bunnu

Electrical
Joined
Oct 30, 2003
Messages
1
Location
IN
dear all,
i need to desgine a 28 khz narrow band pass filter with 100hz band width so please send the information regarding desginr of that as soon as possible.
lu
venky
 
What is this for? 100hz sounds kinda tight...
 
transpose it to a much lower fr.

<nbucska@pcperipherals.com>
 
100 Hz bandwidth at 28 kHz indicates a Q of 280. This is achievable, but is not enough of a specification to allow anyone to design a filter. You must know what the separation is between the passband and the stopband, what the minimum attenuation in the stopband must be, and how much ripple is allowed in the passband. And you also need to know if the filter design is passive, active, analog, digital, and then a number of other circuit questions must be addressed before detailed design commences.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top