nickypaliwal
Materials
HIC testing is not required for base material with clad or weld overlay. However base material still needs NACE compliance.
Please explain.
Please explain.
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
NACE for Weld overlay/Clad
- Thread starter nickypaliwal
- Start date
- Status
Not required by whom? Oh yes, don't tell me. It's down to the specifier's perception of speed of the degradation mechanisms and the exposed surface area needed to bring them about.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
Steve Jones
Corrosion Management Consultant
All answers are personal opinions only and are in no way connected with any employer.
- Status
Similar threads
- Question
- Locked
- Question