Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

multiple polygon body creation with spot weld

Status
Not open for further replies.
prakhar5aug

prakhar5aug

Automotive
Joined
Jul 19, 2014
Messages
28
Location
FR
Hello,

I used weld point - resistance spot in the modelling environment to create spot weld but when switching to FEM environment there are multiple unnecessary polygon bodies created automatically which are invisible (infinitely small). how to prevent these polygon body

Regards,
Prakhar Gupta
 
Status
Not open for further replies.

Similar threads

Salvenheit01
  • Locked
  • Question Question
FEMAP: Create CFAST at multiple points
Replies
0
Views
984
Salvenheit01
Salvenheit01
catalina29
  • Locked
  • Question Question
Nastran SOL400 normal modes analysis with touching contact
Replies
1
Views
3K
karachun
karachun
Xprivate
  • Locked
  • Question Question
FEMAP SUBSTEP/MULTISTEP/Multiple loadcases for same BCs
Replies
4
Views
585
ThomasH
ThomasH
aabaig2022
  • Locked
  • Question Question
Multipoint Constraint Equations for Rigid Body Elements in MSC Nastran
Replies
3
Views
934
dmapguru
dmapguru
Wrench88
  • Locked
  • Question Question
Filter choppy crimpy buckling modes with MaxMin(rotations)
Replies
4
Views
986
tim1958
tim1958

Part and Inventory Search

Sponsor

Back
Top